The single bag filter currently sold in the market is also one of the dust removal devices, and the application is relatively wide, but many people work very vaguely on the working principle of this type of dust removal device. In this regard, Xiao Bian carried out a summary of its working principle, and interviewed relevant professionals, to understand the main working methods of the bag filter, I hope to provide you with a corresponding reference.

Usually, the soot needs to pass through the single bag filter to enter the filter bag. After two stages of filtration, simple filtration can be achieved at this time, and the filtered clean air enters the dust removal device, of course, the filtered soot adheres to Dust collector surface, then. During the collision and rotation of the airflow, the relatively large dust in the middle of the particles is concentrated in the corresponding integrated box, that is, in the special dust collection box.

Of course, after the dust removal is successful, the clean air needs to enter another collection box, where it needs to be dedusted again. By the second dedusting, some small particles of fine particles are collected on the inner wall of the filter bag, and the corresponding separation process can also be realized.

The completely cleaned air can be returned to the corresponding space with the help of centrifugation. The heat loss is greatly reduced during this process, so the energy consumed and the power are relatively low. Of course, the degree of machine wear is also greatly reduced, so the service life of the single bag filter can be guaranteed.