The bag filter accessories operate reliably and smoothly. The noise is low. The fault is small. The service life is long. The toothed parts are made of ductile iron and bearing steel. Good performance. High wear resistance. Bearings. Gear box. Keep away from valve body. Avoid the influence of high temperature dust. The front and rear end caps have good sealing performance, prevent dust leakage, and extend the service life of the motorized parts. It has strong overload capability and low impact inertia moment. It is suitable for frequent starting and reverse rotation. By adopting the principle of planetary rotation, the input and output are on the same axis, and the uniqueness is directly integrated with the motor, so the structure is compact and beautiful, novel, small in size and light in weight.

Dust collector accessories include dust bag, skeleton, electromagnetic pulse valve, pulse control instrument and other special accessories for dust collectors. The filtered flue gas must meet the national emission concentration standard according to the design requirements of the precipitator; the running resistance of the precipitator is generally kept below 150Pa; the working life of the filter material is more than 2 years; the working life of the electromagnetic pulse valve of the cleaning system reaches 5 years. Thousands of injections. The dust collector accessories combine the principle of inertial separation and filter dust removal to process high-concentration mixed airflow, which can effectively separate fine particles below 5um. It is an ideal substitute for traditional cyclone separators. The dust collector accessories should be comprehensive before use. Understand the characteristics of the dust collector accessories, so we need to be careful.

Through the baffle of the ash hopper, part of the large particle dust in the gas is separated by the inertial force and falls directly into the ash hopper. The fabric and design of the dust filter bag should be as efficient as possible, easy to dust and durable. The cage inside the dust filter bag is used to support the filter bag to prevent the filter bag from collapsing, and it helps to remove and redistribute the dust cake.

The selection of the dust filter bag is very important, it directly affects the dust removal effect of the dust collector. The dust filter bag is selected from the following aspects: gas temperature, humidity and chemical, particle size, dust concentration, filter wind speed , dust cleaning methods and other factors. The dust-containing gas enters the filter bag filtration zone of the tank, and most of the dust is trapped on the outer surface of the filter bag, and the clean gas enters the filter bag through the filter material, and the purified gas enters the upper tank through the dust filter bag mouth. After that, it is discharged by the air outlet.

The content of the article comes from the network. If you have any questions, please contact us!